9170官方金沙入口-app官方版

Navigation:Refrigeration/cooling/refrigeration equipment engineering-Shanghai Ying Xiang refrigeration equipment limited >> Solutions >> Ammonia spill treatment method of ammonia compressor >>
Ammonia spill treatment method of ammonia compressor
Ammonia spill treatment method of ammonia compressor

Ammonia spill treatment method of ammonia compressor

Release time:2016-02-25 11:50:32
Ammonia spill treatment method of ammonia compressor
1, ammonia ammonia compressor leak after the accident, first switch off the compressor power, immediately close the exhaust valve, suction valve (two-stage ammoniacompressor should also close the secondary valve suction valve I and II) is refueling,should promptly close the fuel valve.
2, stopped the machine room should be executed, the operator found ammonia spills immediately shut down of the compressor and according to their location, close the machine will run near the machine loses power.
3, such as ammonia spills large, could not get close to the accident, should go out and get down, down into ammonia immediately shut down all oil separator valve low voltage barrel and connected with the suction valve.
4, quickly open the ammonia compressor room to all the fans.
5, dealing with accidents, using hoses to water leakage of ammonia parts, ammoniaand water solution, attention to the compressor motor, waterproof protection.
 
 
 
 
 
 
 
 
 
 
 
 
 
<